Ezypor Fuel
Additive Dispenser 28mm $10.00
To order online CLICK HERE https://denniswood.proma.global/products/ezypor-fuel-additive-dispenser-28mm-v2
FUEL ADDITIVE
DISPENSER
PRO-MA SYSTEMS
is proud to introduce a device that is:
To dispense PT5
Petrol/GT5 Gasoline Treatment from 500ml
bottles and DT5
Diesel Treatment from 1 litre bottles.
The EZY-POR can
be transferred from bottle to bottle, so it is
a versatile and
economical investment. It is fitted with a childproof
ratchet in the
bottle attachment and in the top cap to
give you piece
of mind.
INSTALLATION
Remove the
tamper-evident transport cap from PT5/ GT5 or
DT5 and install
the EZY-POR dispenser into the bottle. The
plastic inlet
pipe will curve if it is longer than the depth of the
bottle to
extract the maximum product. Screw the ribbed section
down until it
ratchets. This will apply correct tension to the
internal seal.
OPERATION
Press down on
the top cap to engage the ratchet, and unscrew.
The extension
nozzle pops up and the bottle is squeezed gently
to fill the
EZY-POR to the correct level, in steps of 5ml, 10ml,
15ml and 20ml
as per calibrations. Pour the contents into the
fuel tank. A
ball bearing falls forward when the bottle is tipped,
to retain the
remaining liquid. Replace the top cap, pressing
down whilst
rotating the cap to the fully sealed position.
REMOVAL
To change the
EZY-POR to another bottle, press the lower
ribbed section
down to engage the ratchet, and unscrew.
To Oder online
CLICK HERE https://denniswood.proma.global/products/ezypor-fuel-additive-dispenser-28mm-v2
Independent Distributor
Dennis Wood
10 Mawson Street
Woodridge Qld 4114
Ph 0407 210 013


Comments
Post a Comment