Pro-Ma MBL Grease Superior Lubricant (450g) $30


To order CLICK HERE https://denniswood.proma.global/products/mbl-grease-450g

You tube https://www.youtube.com/watch?v=bGVpJq1us8c

MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base.

Product Information

MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base. It is extremely resistant to water wash-out and has an operating range from -40°C to +280°C.

MBL Grease may be used for universal joints, suspension and steering joints, wheel bearings, electric motor bearings, hoist and conveyor bearings, axles and bushes, winches and gear boxes (where grease is specified).

There are many operators who would normally grease their machinery on a daily basis. They are now lubricating that same machinery every third or in some cases, every fourth day. To get the full benefit from MBL Grease use it sparingly. It has a tremendous operating range, working down below freezing and up to very high temperatures with exceptional results.

MBL Grease is being used in the commercial, industrial, earthmoving and marine fields with success, under many diverse conditions. It is extremely good where water contact is likely.

The micro-metallic particles dispersed throughout the MBL Grease are spherical in shape and act as millions of tiny ball bearings between two surfaces, greatly reducing friction. Under high pressure application, these spherical micro-metallic particles are deformed and flattened to fill up any pits, scores or irregularities which occur in the surfaces to be lubricated. The unique properties of the micro-metallic particles provide lubrication, film strength and heat dissipation.

MBL Grease has a Lithium Complex base. It features an operating range of -40°C (-40°F) to an incredible 280°+C (500°+F). Most current Lithium base greases have a maximum operating temperature of 120°C (250°F), while some new Lithium Complex greases have maximums of 180°C (360°F) in a mineral oil and 230°C (430°F) in a synthetic oil. The maximum continuous operating temperature of MBL Grease is 205°C (400°F).

The extreme conditions under which MBL Grease now efficiently lubricates, range from deep freeze operation to disc brake temperatures. MBL Grease has superior oxidation stability, improved water resistance, rust and corrosion protection, high load carrying capability and nylon bearing cage compatibility.

Some grease bases may not be compatible with a Lithium Complex Grease, e.g., clay or Bentonite Grease. If possible, ensure that all previous grease is cleaned from the components to be greased and from the grease gun before using MBL Grease. This will ensure that you receive the maximum benefit from this exceptional grease.

When greasing bearings, particularly high speed bearings, it is important not to fill the air space more than one quarter to one third full of grease to allow expansion and to allow the grease to move with the bearings for proper lubrication.

Pro-Ma Performance Products MBL Grease represents the latest in lubrication technology reinforcing Pro-Ma Systems constant commitment to providing quality products to serve the interests of our Distributors and the retail customers.

Composition

The Lithium Complex soap structure with a micro metallic base lubricity matrix provides good high-temperature performance characteristics. In many conventional greases, load carrying additives normally limit high temperature performance but MBL Grease retains this feature whilst continuing to provide extreme pressure protection. MBL Grease provides dependable lubrication at low temperatures. Low temperature torque tests conducted at -40°C (-40°F) show MBL Grease to be suitable for use at temperatures at or above this level. The ability to retain a relatively soft consistency at low temperatures means that cold weather dispensing problems are minimised. MBL Grease has extreme pressure and anti wear characteristics that enable it to serve under conditions of high loading or severe shock loading.

Benefits of Use

    Performs within high and low temperature operating ranges

    Resists water and water washout

    Provides oxidation stability

    Protects against rust

    Protects against extreme pressure

    Works well with high loading or severe shock loading

    Extends lubrication periods

    Prevents excessive seal swelling

Specifications

The Base Grease Used in MBL Grease has the Following Specifications:

NLGI Grade................................................................. 2

Soap Type.................................................................. Lithium-complex

Texture....................................................................... Buttery

Base oil viscosity

cSt at 40°C................................................................ 148

cSt at 100°C.............................................................. 14

SUS at 100°F............................................................. 767

SUS at 210°F............................................................. 75

Base oil viscosity index............................................... 90

Dropping point C (F) (ASTM D 2265)............................. 280°+C (500°+F)

Penetration, mm/10 (ASTM D 217)

Unworked.................................................................. 280

Worked 60 Strokes.................................................... 285

Worked 100,000 strokes, % change.......................... .+10

Trident probe viscosity (ASTM D 3232)

204°C (400°F), poises................................................ 15

Oil Separation (ASTM D 1742)

24 hr at 25°C (77°F), %.............................................. 3

Lubrication life (ASTM D 3336), no. 204 bearing

10,000 rpm, 163°C (325°F), hrs................................. 290

Oxidation stability (ASTM D 942)

Pressure drop at 100 hr, kPa (psi).............................. 14(2)

Pressure drop at 500hr, kPa (psi................................ 70 (10)

Roll stability (ASTM D 1831) % penetration change.. +10

Wheel bearing test (ASTM D 1263 modified: 60-9 pack 160°C (325°F)

Leakage, g.................................................................. .1.5

Load carrying properties:

Timken load (ASTM D 2509,kg (lb)............................... 25 (55)

4-Ball EP test (ASTM D 2596)

Load wear Index, kg.................................................... 40

Weld point, kg............................................................ 250

4-Ball wear test (ASTM D 2266), 40kg, 1200rpm,

75°C (167°F), 1 hr. Wear scar diameter, mm............. 0.40

Ball-joint test (ASTM D 3428)

Brine sensitivity (noise and wear)............................. Pass

Torque stability.......................................................... Pass

Water washout (ASTM D 1264), % at 80°C (175°F)... 4

Rust prevention (ASTM D 1743), ASTM rating........... 1

Low temperature torque (ASTM D 1478), -40°C (-40°F)

Starting, g-cm............................................................ 13,000

Running, g-cm........................................................... 5,000

Mobility (U.S. Steel method)

Flow rate at -18°C (0°F), g/sec.................................. 0.5

Rubber swell (GM method) 70hr at 100°C (210°F)

Volume change, %..................................................... +12

Handling

Product contains petroleum oil, copper and lead particles, Do NOT store near heat, sparks or flame. Wash with soap and water after contact with skin. KEEP OUT OF REACH OF CHILDREN. A Material Safety Sheet is available from Pro-Ma Systems.

Warning

Do NOT take internally. Harmful or fatal if swallowed. Contains copper and lead particles and hydrocarbons. If swallowed contact a doctor immediately. Wash hands after use.

Medical Advice: Contains petroleum oil, copper and lead particles. If swallowed, do NOT induce vomiting. Call physician immediately.

Size Available

450g

To order CLICK HERE https://denniswood.proma.global/products/mbl-grease-450g

 











Independent Distributor

Dennis Wood




10 Mawson Street

Woodridge Qld 4114

Ph 0407 210 013

Comments

Post a Comment

Popular posts from this blog

Image
Pro-Ma Performance MBL8 Concentrated Oil Additive (12 x 250 mL) $385 Buy 12 at $385 get 1 FREE This sells for $35 a bottle times 12 is $420 Conditions apply. To Order CLICK HERE https://denniswood.proma.global/products/mbl-8-oil-additive-12-x-250ml You tube https://www.youtube.com/watch?v=M9RpAlcRIDY Increase horsepower and fuel economy, reduce emissions and reduce engine and gear wear. MBL8 Concentrated Oil Additive is an outstanding oil supplement for petrol and diesel engines, which has been designed to increase horsepower and fuel economy, restore compression, reduce emissions, oil consumption, engine and gear wear. MBL8 Concentrated Oil Additive consists of micro-metallic particles suspended in a base oil, together with other ingredients which provide superior lubrication, reducing friction, heat and wear. For use in petrol and diesel engines, manual transmissions, differentials (not limited slip differentials), transfer cases, power steering, some air compresso...
Read more
Image
MBL8 oil additive place the bottle into a container of hot water and leave for about 2 minutes then shake it and open the bottle and inject into the dip stick while vehicle is running. Passenger cars and light commercial vehicles: (a) With 4 cylinders, add 75mL per application. (b) With 6 cylinders, add 100mL per application. (c) With 8 cylinders, add 125mL per application. In manual transmissions, differentials and gearboxes add 20 mL of Pro-Ma MBL8 per litre of oil (Not for use in automatic transmissions or Limited Slip Differentials). In large hydraulic systems, e.g., Power Steering or Farm Machinery and Industrial Systems add 1 part Pro-Ma MBL8 to 250 parts oil, or 4 mL per litre. Do NOT use in torque converter systems or with clutches or brakes that operate in oil. For small engines such as 4 stroke mowers and industrial engines add 20 mL per litre or 1 part Pro-Ma MBL8 to 50 parts engine oil.   PLEASE DO NOT OVER DOSE. More is NOT better. Pro-Ma MBL8 Concentrate...
Read more
Image
Pro-Ma Performance MBL Grease Superior Lubricant ( 4kg ) $195.00 To order CLICK HERE https://denniswood.proma.global/products/mbl-grease-4kg You tube https://www.youtube.com/watch?v=bGVpJq1us8c MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base. Product Information MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base. It is extremely resistant to water wash-out and has an operating range from -40°C to +280°C. MBL Grease may be used for universal joints, suspension and steering joints, wheel bearings, electric motor bearings, hoist and conveyor bearings, axles and bushes, winches and gear boxes (where grease is specified). There are many operators who would normally grease their machinery on a daily basis. They are now lubricating that same machinery every third or in some cases, every fourth day. To get the full benefit from MBL Grease use it sparingly. It has a tremendous operating range, working down below freezing and up to very high t...
Read more